Many respected engineers have been trying for years to bring a compressed air car to market, believing strongly that compressed air can power a viable "zero pollution" car. Now the first commercial compressed air car is on the verge of production and beginning to attract a lot of attention, and with a recently signed partnership with Tata, India’s largest automotive manufacturer, the prospects of very cost-effective mass production are now a distinct possibility. The MiniC.A.T is a simple, light urban car, with a tubular chassis that is glued not welded and a body of fibreglass. The heart of the electronic and communication system on the car is a computer offering an array of information reports that extends well beyond the speed of the vehicle, and is built to integrate with external systems and almost anything you could dream of, starting with voice recognition, internet connectivity, GSM telephone connectivity, a GPS guidance system, fleet management systems, emergency systems, and of course every form of digital entertainment. The engine is fascinating, as is and the revolutionary electrical system that uses just one cable and so is the vehicle’s wireless control system. Microcontrollers are used in every device in the car, so one tiny radio transmitter sends instructions to the lights, indicators etc Most importantly, the 68 mph Aircar is incredibly cost-efficient to run – according to the designers, it costs less than one Euro per 100Km (about a tenth that of a petrol car). Its mileage is about double that of the most advanced electric car (200 to 300 km or 10 hours of driving), a factor which makes a perfect choice in cities where the 80% of motorists drive at less than 60Km.
Monday, 28 September 2009
Monday, 14 September 2009
STOP PRESS! - Does your compressed air meet DIN ISO 8573 - 1 classification?
Compressed air which is contaminated by oil vapours is a concern for every compressed air user. Depending on the use, there are risks for production plants, the environment or even our health.
The compressed air classes defined in ISO 8753-1 provide a guide for assessment of air quality, however it has not been possible to constantly monitor oil vapour levels against these guidelines at lower contamination levels – UNTIL NOW!
METPOINT OCV constantly monitors the amount of residual oil vapour in the compressed air flow down to the range of 0.01 mg/m3.
Fields of application
Chemical Industry
Food & Beverage
Coating & Applications
Pharmaceuticals
What classification is your compressed air?
The compressed air classes defined in ISO 8753-1 provide a guide for assessment of air quality, however it has not been possible to constantly monitor oil vapour levels against these guidelines at lower contamination levels – UNTIL NOW!
METPOINT OCV constantly monitors the amount of residual oil vapour in the compressed air flow down to the range of 0.01 mg/m3.
Fields of application
Chemical Industry
Food & Beverage
Coating & Applications
Pharmaceuticals
What classification is your compressed air?
Thursday, 10 September 2009
Can't you hear your money leaking out of the system?
You are probably familiar with the hissing sound a large leak makes. But what about smaller leaks? These also produce sound, but the frequency is too high for our ears to detect it. That's when the Ultrasonic leak detection device comes into place.
The ultrasonic device can detect pinhole leakages with pressure as low as 0.5 bar, the more pressure behind the leak the more turbulence there will be and the easier it becomes to locate.
Why look for leaks?
Compressed air is one of the most costly utilities in a facility today. A simple program of leak inspection and repair can go a long way towards reducing excessive energy costs.
The annual cost of leakage is significant. Even what would be considered a good system, will have an average leakage between 20-30%. The leak reduction program will reduce air consumption and provide savings almost immediately!
A successful leak detection program is also dependant on an effective reporting system. Correctly implemented and supported it will provide vital data on where the leaks are reoccurring, which components and equipment are causing repeated problems.
Leaks cost money every minute, every hour, every week of the year...
So, put a stop to leaks by getting in touch to arrange site visit.
To read more please click here.
The ultrasonic device can detect pinhole leakages with pressure as low as 0.5 bar, the more pressure behind the leak the more turbulence there will be and the easier it becomes to locate.
Why look for leaks?
Compressed air is one of the most costly utilities in a facility today. A simple program of leak inspection and repair can go a long way towards reducing excessive energy costs.
The annual cost of leakage is significant. Even what would be considered a good system, will have an average leakage between 20-30%. The leak reduction program will reduce air consumption and provide savings almost immediately!
A successful leak detection program is also dependant on an effective reporting system. Correctly implemented and supported it will provide vital data on where the leaks are reoccurring, which components and equipment are causing repeated problems.
Leaks cost money every minute, every hour, every week of the year...
So, put a stop to leaks by getting in touch to arrange site visit.
To read more please click here.
Wednesday, 9 September 2009
Compressor Scrappage Scheme
SCRAPPAGE SCHEME - COMPRESS YOUR COMPRESSOR FOR CASH!!!
There's never been a better time to exchange your old compressor for a new energy-efficient one!
We will give you up to £250.00* per kW off a new Hydrovane unit list price for your old one!!! And what’s more, we'll ensure your old unit is disposed of in a safe and environmentally sound manner.
Sounds good? Contact us on 0845 263 6826 or email.
And hurry, the offer is only valid till 30th September 2009!
* Scrappage allowance is calculated from kW rating of old machine. Trade-in value is graded according to model/size of unit. Full details available on request.
Subscribe to:
Posts (Atom)